M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM-320 R Wireless to wireless?

 
SOLVED
Go to solution
Highlighted
Adam E
Occasional Visitor

MSM-320 R Wireless to wireless?

I have an MSM-320 R (Ruggedized) AP with 2 antennas. I am wondering if I can have it connect wirelessly to another AP (picture attached).

If it matters, the other AP is a MAP-320 R

Thanks in advance!

 

 

P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. - Hp Forum Moderator

5 REPLIES 5
Highlighted
cenk sasmaztin
Honored Contributor

Re: MSM-320 R Wireless to wireless?

Map 320 R namely MSM310 R

Yes it is possible
cenk

Highlighted
Adam E
Occasional Visitor

Re: MSM-320 R Wireless to wireless?

Okay, I'm looking at the manual on page 7-2.. it says to set up a static local mesh, and put the 'others' mac address in for remote mac address. I have done that... they still are not connecting?
Highlighted
cenk sasmaztin
Honored Contributor
Solution

Re: MSM-320 R Wireless to wireless?

Ok..
don't use static mesh.
You can connect dynamic mesh very succesfull and very easy

One ap master and another ap slave mode
Mesh id must be same two access point
And
Radio channel must be same
For example channel 1
cenk

Highlighted
cenk sasmaztin
Honored Contributor

Re: MSM-320 R Wireless to wireless?

And radio mode must be localmesh and accesspoint
cenk

Highlighted
Adam E
Occasional Visitor

Re: MSM-320 R Wireless to wireless?

Okay, I have done this.

I can wirelessly connect to either AP, and gain access to both AP's (can log in). But can't access other devices connected to the other AP (but can access devices on the same AP).

Any ideas?

(policy managers and wireless security filters are turned off).

Thanks!