MSM 710 Vlan and SSIDs.

[networkman34]

Hello,

i've got the same issue.

I had a config who's worked with firmware 5.7.0.2 but i upgrade with firmware 5.7.1.1.

I' ve got 2 DHCPs, one with no vlan in 192.168.0.0 and an other in 172.17.0.0 with the vlan 100.

I've got an HP 1910 POE who's connected :

Port 1 ( TAG 100 ): my subnet 172.17.0.0

Port 2 ( Untagged 1 ): my subnet 192.168.0.0

Port 3 ( Tag 100 and untagged 1 and  PVID 100 ) : One AP MSM 410

Port 4 ( Tag 100 and untagged 1 and  PVID 100 ): One AP MSM 410

Port 5 : MSM 710 connected to the Lan Port

I've got 2 SSID on for the vlan 100 call Client  and an other call Android for the subnet 192.168.0.0

So like i say, this configuration worked with 5.7.0.2.... but now i can connect on the ssid Android without problem but when i connect on SSID Client i don't receive any IP.

On my MSM 710 ,  I add a vlan 100 and egress interface for this vlan.

why it does'nt work now ....

Thanks for your answer.

[networkman34 · Accepted solution]

Hi,

I don't have any solution for the support so i just downgraded to 5.7.0.2 and this works now.

Best regards.