M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM 720 Preminum WW + MSM 410 AP firmware 6.5.0.1 trouble

 
Highlighted
msII
Occasional Visitor

MSM 720 Preminum WW + MSM 410 AP firmware 6.5.0.1 trouble

Well, all APs are correctly recognised by MSM720, they got synchronised and updating the firmware from the controller. But  I saw something strange and have absolutely no idea, why this happens: I found out, that some MSM410s are working on 5GHz radio. But all radio settings are configured as a 2,4GHz radio with  channels 1, 6 and 11 restricted. I tried to make an individual radio config for one MSM410 which was working on 5GHz and set it to 2,4GHz. After synchronizing, nothing changed. So I tried to restart the AP. After that, this MSM410 was working correct on 2,4GHz. So I tried a restart of all APs which are working wrong and after this, all APs were working on 2,4GHz again, but not for a long time. In a few minutes i'v got 15 errors (the same as number of APs) -radio is down....   After downgrade to firmware v. 6.4.0.0 (didn't try 6.4.2.0 yet) everything is working fine.  Do you have any ideas what has happend? Any way thank you for attenion and replies (i hope).