M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM 760: Adding Building floorplan to the controller

 
Highlighted
MichaelRicardo
Frequent Advisor

MSM 760: Adding Building floorplan to the controller

Hello,

Is there a feature on MSM 760 to add Building floorplan to the controller and mark AP to the map?

I am looking at all menus and could not find one.

Regards,

Michael

2 REPLIES 2
Highlighted
Michael Hess
Occasional Contributor

Re: MSM 760: Adding Building floorplan to the controller

Hi,

there is'nt such option on the controller. The only way I know, is to use iMC-Software from HP. There you can import floorplans an position the access-points.

Highlighted
CraigS1971
Valued Contributor

Re: MSM 760: Adding Building floorplan to the controller

Hi Michael,

I use this: http://www.ekahau.com/wifidesign/ekahau-site-survey

It works very well. Import autocad plans, set scale, add walls and then plan your environment or simply drop your AP type to have a visual representation of the signal. Quite accurate.

Regards,

Craig.