M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM 760 and Local mesh

 
SOLVED
Go to solution
Highlighted
Georgeisaac
Advisor

MSM 760 and Local mesh

I am facing some issues in integration of msm760 and accesspoints (310)

Customer requirement-Create local mesh between access points with encryption

 

Software version 5.5.3

 

Incompatible settings-It says its because I am using same mesh id which used to connect with msm controller.It ask me to change mesh id or disable it.When I disable it sometimes it will synchronize but after some time it will get reseted and start to restarting.

 

2.Some access points are synchronizing but after some hours I will lose connection and power and mesh LED will start to blink.

3. When one AP got synchronized I tried to move it to another group with alternate master settings But it started to get restarted 

 


 

Radio mode -802.11g

channel selection-Automatic

 

I am attaching logs,config and screen shoots of configuration

 

Please help me..

2 REPLIES 2
Highlighted
Georgeisaac
Advisor
Solution

Re: MSM 760 and Local mesh

Hi,

 

       Issues sorted out

 

The problem because i have configured both on master and slave.

 

I have to configure local mesh in master access points only

Highlighted

Re: MSM 760 and Local mesh

Could you please post screens of your master and slave mesh group settings please?

I seem to have the same misconfiguration issues.

 

Kind regards

Erik