M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM310 and MSM 730 controlling connections

 
Highlighted
Mark Beemer
Occasional Contributor

MSM310 and MSM 730 controlling connections

We have a handful of MSM310's all being controlled by a MSM730. We are looking to allow our guests to access the web and one designated printer (which is behind out firewall). We can do both separately but not combined. Could someone point us in the right direction?

thanks
1 REPLY 1
Highlighted
Fred!
Trusted Contributor

Re: MSM310 and MSM 730 controlling connections

Look at the manual section of the HP networking web site: http://h10144.www1.hp.com/customercare/support/manuals/index.htm

In the MSM section, check out the "HP ProCurve MultiService Mobility Implementation Guide".

You need to have registered to access this, but if you do so, there is a chapter (3 to be precise), that describe a scenario that sounds pretty close to what you want to do.

Hope that helps at least to get started...