MSM422 and mutiple VLANs for a VSC

[Jay Hall MNEA]

I have purchased an MSM422 to replace some older wireless equipment. I have been able to get the data and guest networks working without any problem. However, I have run into a problem with the VSC for the phones.

We are using Mitel IP Phones with a wireless base stand to connect to the wireless network. When the phone boots, it must obtain an IP address on the default VLAN and then obtain an IP address on the vlan for the phones.

Is it possible to configure a VSC to use multiple VLANs? Or has someone run into this situation before and have a solution?

Thanks,

Jay

P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. -HP Forum Moderator

[cenk sasmaztin · Accepted solution]

hi Jay
impossible one VCS on multiple vlan

my advice
create new VCS profile and new voip vlan on your system

VCS profile associate voip vlan and connect voip server, wire or wireless ip phone on the vlan