M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM710 - Forbid traffic between VSCs

 
Highlighted
iggi1406
Occasional Contributor

MSM710 - Forbid traffic between VSCs

Hello,

i have a MSM710 controller and 2 VSCs on it. Every VSC has its own SSID and a seperate IP-Range.

VSC 1:
SSID: Guest
DHCP-Server: from 192.168.19.100/24 to 192.168.19.100/24
WPA-PSK

VSC 2:
SSID: Intranet
DHCP-Server: from 192.168.17.130/26 to 192.168.17.130/26
WPA-PSK


There is a option: -- Allow traffic between --; there I selected -- no --

When I connect to VSC1 with 2 devices everything is ok: They cant ping each other and cant communicate. This is ok, I dont want them to communicate.

When I connect one device to VSC1 and another device on VSC2 there is a problem. I can ping from VSC1 to the device in VSC2. The MSM710 routes the traffic to the other net.

Is there a possibility to disable it?

I hope you can help me,

thank you.
2 REPLIES 2
Highlighted
cenk sasmaztin
Honored Contributor

Re: MSM710 - Forbid traffic between VSCs

hi

if two vsc (vsc1 and vsc2) asign different vlan and two vlan's between routing on switch

can you ping between two network very normal..


this routing traffic must be sperate on switch access list or disable routing between vlan's



cenk

Highlighted
iggi1406
Occasional Contributor

Re: MSM710 - Forbid traffic between VSCs

thanks for your answer. the problem is: i have only a 2520-8G-poe switch. The whole internet-traffic have to go through the MSM710 Internet port. Can I disable the routing between the networks on the wireless controller?