M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM710 - MSM310 - WAN - Multi Site AP Management

 
Highlighted
KCollinson
Advisor

MSM710 - MSM310 - WAN - Multi Site AP Management

Good day,

 

Scenario:
2x geographic sites (One Controller)

Site 1:
MSM710 Mobility Controller
ProCurve 5400 series Switch
MSM 320 AP
VID 1: 192.168.1.x - Controller and AP management interface VLAN
VID 2: 192.168.2.x - Private VLAN
VID 3: 192.168.3.x - Guest VLAN

AP’s Egress SSID to VID no problem.
Not using the WAN port on the controller, controller is purely for AP config management


Site 2:
ProCurve 5400 series Switch
MSM 320 AP
VID 1: 192.168.11.x - AP management interface VLAN
VID 2: 192.168.12.x - Private VLAN
VID 3: 192.168.13.x - Guest VLAN

 

Question:
How to I get the controller @ site 1 to communicate with AP’s @ site 2 to enable remote management (The WAN can communicate to all VLANs)?

 

Many thanks,
Karl.

1 REPLY 1
Highlighted
Fredrik Lönnman
Honored Contributor

Re: MSM710 - MSM310 - WAN - Multi Site AP Management

If you have routed access between 192.168.1.x and 192.168.11.x you're home free. You'll only have to make the APs in 192.168.11.x able to find your controller, this can be made either through staging, dhcp option 43 or DNS (cnsrv1.localdomain)

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S