M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM710 bringing it back to life - refuse login issue

 
Highlighted
baradhili
Occasional Collector

MSM710 bringing it back to life - refuse login issue

Hi all,

Bringing an MSM710 back to life for my home network... runninginto some issues:0

 

1. It wants SSLv3 - I've managed to turn on SSLv3 on internet exploder - the rest of my browsers refuse it.. Is there a way of upgrading firmware to make this box secure? happy to pay for a support license if that is what it takes

2. Trying to login with admin/admin but I keep getting "Login refused" any suggestions? I only seem to be connected via http:// wireless.hp.internal:8080

3 REPLIES 3
Highlighted
parnassus
Honored Contributor

Re: MSM710 bringing it back to life - refuse login issue

The "Login refused" is probably due to bad login credential used for the "admin" user (was the default - admin - password changed in the past as suggested by HP on Quick Installation Guide?)...maybe bringing the MSM710 back to its factory default state would help...regarding the MSM710 firmware availability, a check through HPE Support Portal should be easy...but keep in mind that MSM710' EoS phase started on April 2013 in favour of MSM720 as proposed product replacement.
Highlighted
baradhili
Occasional Collector

Re: MSM710 bringing it back to life - refuse login issue

Thanks Parnassus,

I did do a "hold the reset button in until three long flashes type factory reset, I can't find anywhere is that does actually reset the password, but uts the only factory reset I can see...

 

will check the portal for firmware...

 

 

Highlighted
baradhili
Occasional Collector

Re: MSM710 bringing it back to life - refuse login issue

For anyone searching... here is where you get the firmware - with a valid support agreement

https://h10145.www1.hpe.com/Downloads/SoftwareReleases.aspx?ProductNumber=J9325A&lang=en&cc=us&prodSeriesId=3963981