M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM720 (UAM user defined vlan)

 
Highlighted
Nico75d
Occasional Contributor

MSM720 (UAM user defined vlan)

Hello,

Concidering i have fully 802.1X + Radius (UAM) working on wired connetions, i'm in trouble with MSM720 and wireless.

MSM720 configured with 2 SSID and Authentication + Radius profile.
HP560 (AP's)

Connection :

The EAP process and dot1x supplicant is working and the client receives DHCP for the 2 subnets respectively.
For example :   
192.168.2.0 VLAN2 | SSID : SSID2 User : Test2
192.168.3.0 VLAN3 | SSID : SSID3  User : Test3

Problem :

If I do the auth on the SSID2 with the user Test3, the process works and I get DHCP From vlan2. 

My PEAP-EAP Policy are ok. I think the UAM pushs the radius parameters and MSM720 overrides the proper vlan for the user.

Thanks for your help.
Have a good day.

 

1 REPLY 1
Highlighted
RamKrish
Valued Contributor

Re: MSM720 (UAM user defined vlan)

Hope you are not having any static VSC binding on the MSM group level based on the SSID.

In any case, if the Radius Accept message from UAM contains the VLAN attribute then MSM should use that VLAN to map the user traffic.  It should not map it to other vlan in your case it should map to vlan 3 for test 3 and NOT vlan 2.

To validate this, you might need to do a wireshark packet capture on the IMC/UAM server and we need to see the actual radius packets to understand if UAM is indeed sending the correct return attributes to the MSM or not.

Regards
Ram