M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM760 Continuous SNMPD Authentication Failed System Log Errors

 
Highlighted
Troy Harrington
Occasional Visitor

MSM760 Continuous SNMPD Authentication Failed System Log Errors

Our MSM760 is getting the following error message roughly 6 times per 30 seconds:

warning snmpd Authentication failed for %username%

SNMP is setup correctly. ProCurve can detect and read all access points and the controller.

I'm not too sure where to go from here. Any ideas? The logs don't give enough info.

 

P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. -HP Forum Moderator

1 REPLY 1
Highlighted
TechnikHener
Visitor

Re: MSM760 Continuous SNMPD Authentication Failed System Log Errors

I've the same Problem on a MSM710. I think the errormessages are connected with a discovery problem in Procurve manager.

 

I can discover the controller but the accesspoints are offline in my PCM.

 

Does anyone know how i can solve the problem?