M and MSM Series

MSM760 Guest Web Authentication on multiple subnets

 
Rob Kusbel
New Member

MSM760 Guest Web Authentication on multiple subnets

Hello, I am trying to figure out how to span a VSC using web authentication over multiple subnets. I have a controller located at one site servicing APs at 3 sites with multiple VSCs but only the site with the controller can use the web authentication page. I know the LAN interface must be used as the default gateway, but I am not sure how to make this work on a subnet not directly attached to the controller.

 

P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. -HP Forum Moderator

1 REPLY 1
Fred!
Trusted Contributor

Re: MSM760 Guest Web Authentication on multiple subnets

You need to check the checkbox that says "always tunnel client traffic to the controller", this will do exactly as it is advertised, which is to tunnel the traffic all the way through the network to the controller ensuring the ALL guest traffic will reach the controller.