MSM760 Wireless Services on and off

[Mitch Reed]

I have an MSM760 and 59 317 & 320 radios attached. I have noticed that when looking at the wirless clients the numbers keep changing drasticly. I then looked at All Discovered APs and see that the wireless services are going up and down on 2/3 of my AP's at any given time. These are all attached to HP 4000, 2520 or 2610 switches with the administrative vlan untagged (30) and the vlans for the VSC's are tagged on both ends. Any ideas or suggestions????

[Pieter 't Hart]

look at the logging of the switches.
maybe you'll find spanning-tree topology reconfigurations?

[Mitch Reed]

Spanning Tree is disabled on all my switches.

[Mitch Reed]

Does anyone know if the 760 has a limit to the # of wireless connections? I have licenses for 80 AP's with 59 attached, however, I noticed a ton of these entries:

Jan 18 09:52:44 err iappd K159-03592 Iapp_L3AddrCallback1056: Error from WIRELESS_get_Station, client 00:12:f0:bc:3f:0a , return value 272

???

[Jouni Kosonen]

Hi Mitch,

Jan 18 09:52:44 err iappd K159-03592 Iapp_L3AddrCallback1056: Error from WIRELESS_get_Station, client 00:12:f0:bc:3f:0a , return value 272

This is a bug, please contact your procurve support team to get a new software.

[Mitch Reed]

You are correct, it is a bug. I updated the firmware this morning and it is working now.

thanks,
Mitch

[BGraham_1]

Wss the solution for this issue a firmware update for the MSM760 or the switch?

What version was needed?

Thanks,
Bob

[Jouni Kosonen]

Hi Bob,

The solution for this issue is to upgrade the MSM760 software.

If I remember correct the original firmware that fixed the issue was 5.3.2-7313 (please note that there is newer software than this).

Hope this answers to your question.