MSM760 guest access

[Mike_brussels]

HI,

I've have an issue, configuring the guest access on the msm760 controller.

connected to the guest vlan, i get an correct ip adres and i'm promped to enter my credentials.

But I cannot connect to the internet.

apparently the wireles lan controller doesnt route the guest vlan to the internet port.

I've tried multiple settings but none of them worked...

[MSMenthousiast]

by default, your controller will egress using the routing table (from the online help):

Select the Default option to send traffic without specifying a specific interface. The interface that is used will be selected by the routing table based on the traffic destination. To configure the routing table, select Controller >> Network > IP routes.

If your internet port is configured/connected, then you should egress through that interface.

So first thing, check your routes (Network -> IP Routes)