M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM765 Wireless Controllers allowing traffic between wireless clients

 
Highlighted
NL42
Occasional Visitor

MSM765 Wireless Controllers allowing traffic between wireless clients

Gretings,

 

We have 2 MSM765 Wireless controllers that are currently configured with 3 VSC's each.

 

For security reasons we wish that clients connected to any of the SSID's are unable to see other clients on the network, but even after setting Allow traffic between nn wireless clients to ON on the Virtual AP and synchronizing all the AP's I am still able to see other devices.

 

The most bizarre thing was that we had one of the VSC's already configured with ON that was not allowing for other devices to be seen, to test and make sure it was a controller issue we have set it to ALL. We were then able to see other devices. When turning it back to NO there are no changes and we keep on detecting other devices.

 

Any ideas on what else we are missing? 

1 REPLY 1
Highlighted
Z273
Frequent Advisor

Re: MSM765 Wireless Controllers allowing traffic between wireless clients

Hi NL42,

 

Can you disclose the AP you use and the MSM version ?