M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM765zl - FW 6.2.0.0: DHCP server ignores the setting

 
Highlighted
DSV12
Frequent Advisor

MSM765zl - FW 6.2.0.0: DHCP server ignores the setting

I tried to use internal DHCP server on MSM765zl but found that server fully ignores the setting "Listen for DHCP requests on: LAN port". Regardless of this setting, internal DHCP-server always responds to LAN. Same setting for "DHCP relay agent" mode works perfectly: if I uncheck "Listen for requests on: LAN port", external DHCP-server stops to respond (through dhcp relay agent) to LAN segment. The only problem is with the internal DHCP-server.

2 REPLIES 2
Highlighted
JesseR
Regular Advisor

Re: MSM765zl - FW 6.2.0.0: DHCP server ignores the setting

I'm not sure I understand your question. Can you clarify please?
Jesse R
Source One Technology, Inc.
HP Partner


MSM 5.7.x deployment guide:

Highlighted
DSV12
Frequent Advisor

Re: MSM765zl - FW 6.2.0.0: DHCP server ignores the setting

Controller -> Network -> Address allocation -> DHCP server -> Configure (Listen for DHCP requests on: LAN port -- uncheck).  But DHCP-clients in LAN segment are continue to receive replies from internal MSM765zl DHCP-server.

 

Same setting for DHCP relay agent:

Controller -> Network -> Address allocation -> DHCP relay agent -> Configure (Listen for requests on: LAN port -- uncheck).

Works as it should be: DHCP-clients in LAN segment don't receive any replies from DHCP relay agent.