M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Moving MSM775 Wireless Controller

 
Highlighted
Cellamare
Occasional Contributor

Moving MSM775 Wireless Controller

Hi all this is my first post ever. I'm going to need to move my MSM775 wireless controller modules to a new 5400R zl2 switch chassis. The chassis is brand new and has never had any modules in it before. I have no problem loadind the config from the old switch and configuring any tagging that needs to be done. My question is the config of the MSM775 controllers. I know that the config is on the hard drive of the controller. Of course i will back up the controller config be fore any work is done. I don't want to have to go through the trouble of reconfiguring all the VSC's and other information. As for as i can tell i don't think I'll have any issues but it"s always nice to get some input from someone has done this before. I'm at a college campus and minimum down time is essential. Any input someone might have would surley be appriciated