M and MSM Series
1748074 Members
5198 Online
108758 Solutions
New Discussion

Need cim.startup for MSM430 AP

 
paa2006
Occasional Advisor

Need cim.startup for MSM430 AP

Hi, All.

I have few E-MSM430 APs which are in TFTP-mode (thanks to Walter001).

I have downloaded two files from HPE support site - V6.6.8.2-HP560-MSM410-MSM430-MSM460-MSM466-MSM466R-B23491.zip and V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385.zip but there is only .cim file there. No cim.startup.

folder contents of V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385:

C:\Temp\V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385>dir
 C:\Temp\V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385

14.09.2018 20:22 <DIR> .
14.09.2018 20:22 <DIR> ..
16.10.2017 17:46 248 828 5200-3857_MSM_3457_RN_5790_Final_Oct-05-2017.pdf
16.10.2017 08:10 281 825 V5.7.9.0-mibs-B23385.tar.gz
16.10.2017 08:10 17 444 452 V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385.cim

 

it's very sad but only cim file.

 

Could somebody share cim.startup file with me? I cant find cim.startup anywhere.

 

Thanks a lot.

1 REPLY 1
SantoshPG
HPE Pro

Re: Need cim.startup for MSM430 AP

Hi,

I would suggest to please log a case with support team for the startup cim file. 

Link for support numbers :- https://h20195.www2.hpe.com/v2/Getdocument.aspx?docname=A00039121ENW 

Thank you,
I am an HPE employee
-------------------------------------------------------------------------
Was the post useful? Click on Kudos Thumb below