Outdoor antennas for MSM 466 ?

[mantasdesign]

Hi Team,

Please advise me which antennas can I use with MSM 466? I am planning to install 9 APs in total outside a factory. Looking for dual band omnidirectional (OUTSIDE) antennas which are fully compatible with MSM 466. 

Can I connect this two antennas ( links below ) to a single MSM 466?

http://www8.hp.com/lamerica_nsc_carib/en/products/oas/product-detail.html?oid=5195448

I need both bands working outside.

Thanks a lot guys

[JesseR]

I've used J9719A and J9720A outdoor antennas with the 466-R APs. they seem to work well.

[SBA_Mark]

Ditto for us as well.  Single outdoor 466-R and a J9719a and J9720a MIMO Omni setup.  Works fine.  Over a year and a half outdoors.

[Richard Litchfield]

Just watch the antennae connections.

• The MSM466-R (ruggedised outdoor) has the large N type connectors.
• The MSM466 (internal) has the smaller RP-SMA type connectors.

The outdoor antennae that HP sells have N type connectors; to connect to an internal MSM466, you will need an adapter or suitably equipped RF/Cable guy to reterminate, provide extensions, etc. The adapters are not sold by HP.

PS: The OMNI antennae we used in the waves at the beach are still working a year later!

[GC_Jacob]

I'm sorry, I'm not sure this question was clearly answered. You all refer to the MSM466-R but is the antenna compatible with the indoor MSM466?