M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Same SSID , different VLAN configuration in msm760 mobility controller

 
Highlighted
temuri426
Frequent Advisor

Same SSID , different VLAN configuration in msm760 mobility controller

hello

we have MSM760 mobility controller with 200 APs, and need configure same SSID for all APs, but in different VLAN?

is it possible?

thanks

3 REPLIES 3
Highlighted
Fredrik Lönnman
Honored Contributor

Re: Same SSID , different VLAN configuration in msm760 mobility controller

Hi,

 

By using AP groups you can configure different egress VLANs per VSC in the VSC-GROUP mapping. By that way you can have the same VSC/SSID on all 200 APs but different VLAN per AP group they're in.

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

Highlighted
temuri426
Frequent Advisor

Re: Same SSID , different VLAN configuration in msm760 mobility controller

thank you...:)

 

also one question about traffic distribution, 

 

how does user data trafficwill go in such case?

  through controller or just through the switches and controller will handle only management information?

  does all users keep its first ip addresses when roaming?  

 how does L3  roaming will work in such case? as i remember i need msm mobility conrtoller to solve this task(not access contriller)

Highlighted
DougB-CCCP
Frequent Advisor

Re: Same SSID , different VLAN configuration in msm760 mobility controller

If you do not have the 'access control' option selected for the VSC, it will egress at the access point onto the local network, not going through the controller.
----------------
HP ASE (Mobility), Infrastructure Engineer