M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Suspicious state and wrong IP for APs

 
Occasional Contributor

Suspicious state and wrong IP for APs

Hi, all.

 

We have a MSM760 controller with a mixture of 422 and 460 APs for a total of 37. Lately I have noticed that various of our access points are becoming suspicious. I have looked at the diag info displayed on the controller and that hasn't helped. The only change we have recently made was adding a new SSID to the network and added about 6 new APs (none of which have gone into the suspicious state). I have also noticed (but I think it has been doing it since day 1) that the APs themselves get a management IP from any VLAN that is tagged or untagged at the AP interface on the switch. There are a total of 3 SSIDs on out network all with different VLANS and a management VLAN for the AP that is untagged for the AP. We are running firmware version 5.7.2.0-12736.

 

Does anyone have any suggestions to either of the problems? I don't necessarily think they are both related.

 

Daniel

 

1 REPLY 1
Highlighted
Advisor

Re: Suspicious state and wrong IP for APs

u can set the AP to use static IP.. its easy to maintain..
but u need to make sure the correct untagged port configured at switch