M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN Setup

 
Highlighted
DC2433
Occasional Visitor

VLAN Setup

I am still trying to get VLAN's to  work properly on the MSM710.  I created a network profile (VLAN1 - Default VLAN), and associated that VLAN with the LAN network port on the MSM.  However, as soon as I tag the port on the switch that the MSM710 connect to, I lose connectivity.  How can I get the MSM to recognize tagged frames? 

1 REPLY 1
Highlighted
Master_lain
Occasional Advisor

Re: VLAN Setup

Good evening,

do you lose complete connectivity or just management?

Steps would be.

1. Network -> Network profile, Add, Name + ID
2. Network-> Add new Vlan -> Interface + Vlan

Then you should be done.

Make sure management is set to allow you to access on the specified VLAN if that is the only VLAN accessible.

 

Regards,

Ryan