M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

WDS connectivity between ProCurve MSM310 & ProCurve MSM320

 
Highlighted
Felix11
Occasional Visitor

WDS connectivity between ProCurve MSM310 & ProCurve MSM320

Hello,

 

I want to establish a connection between two AP's.

One of the AP's (ProCurve 320) will connect the other AP (Procurve MSM310) to the internet.

So the ProCurve 320 is the AP with the incoming internet connection.

 

I have set the antenna's on both of the AP's to AP & local mesh and imported the correct MAC-Adresses.

Although I'm not sure which MAC-address to use, I assume the MAC-Address which is shown on the label of the AP.


I understand I have to import the MAC-address of the other AP and vice versa, but things are not working correctly.

 

Please can someone help me solve this issue?

 

Thanks in advance!

 

P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. -HP Forum Moderator

1 REPLY 1
Highlighted
Richard Litchfield
Respected Contributor

Re: WDS connectivity between ProCurve MSM310 & ProCurve MSM320

If you are having trouble with wireless mesh, try starting with no security and to make sure the actual RF and links are functioning properly, and then start turning on the security restrictions.