M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

enable dhcp server on msm410 AP

 
Highlighted
luthfi_anandra
Occasional Visitor

enable dhcp server on msm410 AP

hi all,

 

i have several hp AP msm410 series and i configured them in autonomous mode. I assigned them with static IP address in bridge port.

 

One thing i want to ask is, how can i make msm410 AP as dhcp server because i have tried and find how to enable dhcp server in msm410 AP but i can't find the solution.

 

Maybe someone can give me a solution how to enable dhcp server in msm410 AP configured in autonomous mode. I really appreciate for the help

 

regards.

3 REPLIES 3
Highlighted
sandyverden
Occasional Visitor

Re: enable dhcp server on msm410 AP

Hi, 

 

i have msm410 and i done configure that as AP..

i think msm410 doesnt support dhcp server, maybe you must create a dedicated dhcp server.

 

i love msm410 because they can make a several ssid, thanks to my boss has give me a chance to configure hp msm410.. :cheer:

Highlighted
Arimo
Respected Contributor

Re: enable dhcp server on msm410 AP

Hi

 

Sorry, it's just an AP. It doesn't contain a DHCP server. You will need to use an external one.


HTH,

Arimo
HPE Networking Engineer
Highlighted
Kell van Daal
Respected Contributor

Re: enable dhcp server on msm410 AP

Arimo is correct that the AP does not have a built-in DHCP Server. However, if you would use a MSM controller and have the APs in controlled mode, you can use the MSM controller as a DHCP server.