M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

how to decode syslog message from MSM760 controller

 
Highlighted
Olivier RIEBEN
Occasional Advisor

how to decode syslog message from MSM760 controller

In the syslog message like:

 

"06-05-2015 16:35:20 Local1.Info 10.9.2.1 eventmgr: EVENT[1837805] Client (mac='A8:A5:A0:96:7E:1E') successfully authorized using WPA2 on interface (value='r1v1')"

 

how to interpret the value "r1v1" to find on which access point the client was connected ?

 

Is this possible using an SNMP request ?

 

Olivier

 

Hulot
1 REPLY 1
Highlighted
Arimo
Respected Contributor

Re: how to decode syslog message from MSM760 controller

This message just tells you that a client connected to 5GHz radio on VAP 1 (if I remember v1 right). You can see which AP the client is in on the controller, but I can't from the top of my head remember how to see it via SNMP. Or if you can.


HTH,

Arimo
HPE Networking Engineer