msm 760 guest and now internal

[EVoight]

I have an msm760 running 5.3.6 firmware.  It has been running for about a year as a guest only device and working great.  Internet port is public and lan port is private on a separate vlan using cisco switches.  I now have to roll out internal and public on the same box.  I have attempted it using vlans on the controller but am having difficulty getting dhcp passed to guest network from correct segment.  No matter what, dhcp seems to come from windows server.

Currently, lan port is on internal network in an access port (stupic cisco switches).  Turning to a trunk port and activating a secondary vsc with vlan egress turned on, allows connection to the guest vsc but, still getting address from internal dhcp.  Any help appreciated.  Have read manual, deployment guide, and several other sources Including this... http://www.sourceonetechnology.com/images/MSM_Setup-Rev0_4H.pdf (very nice btw..)

Still not having any fun with this, any help would be appreciated.

[Evan_ISS]

Have you read this: http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02682324/c02682324.pdf

Even though the examples don't match your (switching) environment exactly, it will give you a good idea (and hands on advice) on how to set up your controller to do what you want it to do.

Hope the above helps.