M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

msm 760 no connection

 
Highlighted
Occasional Contributor

msm 760 no connection

Hi!

I am really thrilled that my employer has tasked me with setting up the msm 760.

It's good to go, only problem is... I don't seem to connect to it, unless I plug my laptop to the internet port.

I have a switch.

Sw1 -> Port 3 -> MSM 760 LAN Port. Untagged with VLAN 666 (Which is the vlan for the msm).

SW1 -> Port 5 -> MSM 410 AP port. Untagged with VLAN 666 (Which is the vlan for the msm).

Management rules is in place, so that the msms controller should be reachable in all areas of my net.

My MSM 760 has activated DHCP, and all my VSC's is currently set up.

Any ideas on why I can't seem to make a connection out of the server room?

5 REPLIES 5
Highlighted
Occasional Contributor

Re: msm 760 no connection

Additional information:

I have 2 ports, one for the msm 320 and one for the msm 760.

The Vlan is 666.

I have set up port 2 and port 3 untagged and tagged, in all different combination, but the msm 760 cant find the msm 320.

Any ideas?
Highlighted
Valued Contributor

Re: msm 760 no connection

Can you ping the MSM, but not connect to the Management page?
Highlighted
Occasional Contributor

Re: msm 760 no connection

Can't ping, can't connect.
Highlighted
Occasional Advisor

Re: msm 760 no connection

if the controller is encapsulated in a vlan you will need to create another untagged port to connect to the vlan to manage it. If the switch supports routing you could create a route to the vlan 666 fron default_vlan for management.
Occasional Advisor

Re: msm 760 no connection

you could leave the AP and controller on the default_vlan, changed the AP port to tagged for vlan666. egress authenticated users to vlan 666.