M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

unable to do controller Teaming

 
Highlighted
tejene_bhandari
Occasional Advisor

unable to do controller Teaming

hi everyone 

here is the real challenge i'm facing, im unable to make team 2 controller. 

i have spend 4 days doing so in the end no luck. i have follow all the user manual still no luck. 

can you please guide me step by step how can i make 2 controller team. 

here what i have configure so far.

controller LAN ip address and on both Controller, Controller can ping each other. 

each Controller has same Clock time zone, time 

if possible can you please do teamviewer 2mro GMT +3:00  10 oclock. 

my email id andrewbhandari@gmail.com

skype andrew_bhandari1

 

thanks 

Tej 

1 REPLY 1
Highlighted
Walter001
Advisor

Re: unable to do controller Teaming

Controllers LAN ports are in the same subnet? No routing/firewalling between devices?

Master - 192.168.0.1 , Slave 192.168.0.2

Slave: Management/Teaming: enable "Controller Teaming", choose LAN-Port in "control Channel"

Master: management/Teaming: enable "Controller Teaming", choose LAN-Port in control Channel", enable "Team-manager", fill in "team-name", IP-address 192.168.0.3, fill in correct subnet-mask, choose LAN for "interface"

Thats it!