M and MSM Series

wireless mesh slave cycles


wireless mesh slave cycles

Hello all


I have a single master with 2 local mesh profiles 1 & 2 respectively. Slave 1 connected 2 mesh 1 and Slave 2 connected to mesh 2.


The problem is they all synch briefly then slave 1 starts to cycle, this causes slave 2 to drop off. Whilst slave 1 continually tries to rejoin slave 2 stays off. However you can still ping the device attached to slave 2. Everytime slave 1 tries to connect again the ping times to slave 2 increase.


If slave 1 is removed slave 2 sits there happily.



anyone have any ideas?


thanks in advance