1753532 Members
6257 Online
108795 Solutions
New Discussion юеВ

10GB RJ45 gbic

 
olditguy
New Member

10GB RJ45 gbic

looking for 10GB RJ45 SFP+ for a MSA 2040 everything i am finding if fiber only or DAC? any help appreciated.

2 REPLIES 2
Cali
Honored Contributor

Re: 10GB RJ45 gbic

This is because 10GB RJ45 SFP+ is not supported in MSA.
Use a DAC Cable.

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.
SanjeevGoyal
HPE Pro

Re: 10GB RJ45 gbic

Hello,

- SFPs
NOTE: MSA 2040 SAN Controllers or pre-configured systems do not ship with any SFPs. MSA SAS
controllers and systems do not require SFP modules. You must select one of the following SFP options.
Each MSA 2040 SAN controller can be configured with 2 or 4 SFPs. MSA SFPs are for use only with MSA
2040 SAN Controllers. For MSA 2040 10Gb iSCSI configuration user can use DAC cables instead of SFPs.

Follow the below Quickspecs for more clarifications.

HPE MSA 2040 Storage Quickspecs

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04123144#

https://support.hpe.com/hpesc/public/docDisplay?docId=c05245872&docLocale=en_US

SFP+ module

Description
Option Part Number
HPE MSA 2040 8Gb Short Wave (SW) Fibre Channel (FC) SFP+ 4-pack transceiver (Includes four x 8Gb SW FC SFPs)
C8R23A
HPE MSA 2040 16Gb SW FC SFP+ 4-pack transceiver (Includes four x 16Gb SW FC SFPs)
C8R24A
HPE MSA 2040 10Gb short range iSCSI channel SFP+ 4-pack transceiver (Includes four x 10Gb SW iSCSI SFPs)
C8R25A
HPE MSA 2040 1Gb RJ-45 iSCSI channel SFP+ 4-pack transceiver (Includes four x 1Gb RJ-45 iSCSI SFPs)
C8S75A
NOTE:
  • MSA 2042 SAN controllers do not ship with any SFPs
  • MSA 2042 SAS controllers do not require SFP modules
  • End user must select one of the above SFP options for SAN controllers
  • Each MSA 2042 SAN controller can be configured with 2 or 4 SFPs
  • MSA SFPs are for use only with MSA 2042 SAN controllers
  • For MSA 2042 10Gb iSCSI configuration user can use Direct Attach Copper (DAC) cables instead of SFPs

Part:

10 GbE SFP+ to SFP+ 0.5 m (1.64 ft) Direct Attach Copper (DAC) cable - 10 GbE, 100 ohm cable with SFP+ connectors permanently attached to each end (487967-001)

https://support.hpe.com/hpesc/public/docDisplay?docId=c05245872&docLocale=en_US


If you feel this was helpful please click the
 KUDOS! thumb below!   

Regards,

 


I am a HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo