12 disk of HP P2000 G3 has a LEFTOVER state

[Er-ryhany]

hi ... i have a problem in my HP storage ... i have a HP P2000 G3 FC/iSCSI ... i have two vdisks  in my P2000 one of them called "Virtualisation" has a 12 disk (1To SAS) ... after a power failure ... the vdisk "Virtualisation" is disappear .... and all of his disks has a LEFTOVER state (12 disks)... is there a way to recover my 3.5To of data please...

ps:attachments ( a capture of enclosure overview )

[giladzzz]

Hi

I think you should contact HP support if you have a valid contract

read these posts that talk about same problem

http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP2000-MSA-G3-has-got-LEFTOVR-disks/td-p/1178145

and

http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN-Small/P2000-Leftover-Disk-recovery/td-p/4828993#.Vhys1fmqqko

Regards

If this helped give a Kudo

[Er-ryhany]

thinks giladzzz for your replay...but still not working

 # in my case my vdisk name "virtualisation" is disappear and all of his 12 disks in LEFTOVER state ( see the attachment picture ) ... #

in case you have one or more ( but not all i think ) disks in leftover state ( and you have your vdisk listed on vdisks tab )you can use the trust mode ... but all of disks in leftover state like my case ... i don't know the trust mode can work or not ( i'm worry to lost my data )