MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

2 simultanous disk failures?

 
Highlighted
Brendan Collins_1
Occasional Contributor

2 simultanous disk failures?

2 simultanous disk failures in a MSA1000 SAN RAID set occurred recently. When the disks were reset they no longer indicated any failure. Would this indicate a problem with the RAID controller ?
1 REPLY 1
Steven Clementi
Honored Contributor

Re: 2 simultanous disk failures?

Brendan:

It does not necessarily indicate that there is a problem with the controller and/or the drive. If you had just 1 failure indicator, I probably would not be too worried about it as I have seen disks complain about being bad when they are not really bad.

Having 2 fail at the same time is a different story and I would be more cautious in that situation. Cautious enough to maybe give HP Support a call to see if there was anything you can do to check logs or run a program that checks out the controllers/backplane of the MSA shelf.

If there is a problem, it might just be a signaling issue with the backplace. I have seen several bad backplanes in the past 5 years where... everyting works just fine, except for one slot that always drop a drive into a failed state every now and then for no reason.



Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)