MSA Storage

Add HP MSA 2050 TO Solarwinds SRM

New Member

Add HP MSA 2050 TO Solarwinds SRM

Hello to all

we want add HP MSA 2050 TO SRM 6.5.0

After config based on SRM: Enable a HP P2xxx / MSA onboard provider , what information should be used for API Credentials section.

i check "Use SMI-S Username and Password for API Authentication" box, but error show as follow :

 There was an error connecting to provider:
API credentials error: Test connection failed. Connection cannot be established. Verify..


show protocol output:



Web Browser Interface (HTTP): Disabled
Secure Web Browser Interface (HTTPS): Enabled
Command Line Interface (Telnet): Disabled
Secure Command Line Interface (SSH): Enabled
Storage Management Initiative Specification (SMI-S): Enabled
Unsecure Storage Management Initiative Specification (SMI-S 5988): Disabled
Service Location Protocol (SLP): Enabled
File Transfer Protocol (FTP): Disabled
Secure File Transfer Protocol (SFTP): Enabled
Simple Network Management Protocol (SNMP): Enabled
Service Debug (Debug): Disabled
In-band SES Management (SES): Disabled
Activity Progress Reporting (activity): Disabled


please see screenshot 



Re: Add HP MSA 2050 TO Solarwinds SRM



MSA uses just the normal SMU log in user account credentials.

Please refer to the MSA 2050 SMU guide- Pages 179-81:

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo