MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding Storage from MSA1500 to SuSE 10

 
Warren Stewart
Occasional Visitor

Adding Storage from MSA1500 to SuSE 10

Hello,
I set up a new DL320 g5 with an FC1142SR on SuSE 10 SP2 and I want to add additional storage from an MSA1500 SAN Starter Kit.

ACU has been configured through the HomePage and the array has been configured. I'm not sure how to make the logical disks on the MSA available to the OS. Is there something I need to configure in HBA?

Thanks for any help,

Warren
2 REPLIES 2
Sivakumar MJ._1
Respected Contributor

Re: Adding Storage from MSA1500 to SuSE 10

Check the Guide
For HP Online Case Logging-->http://support.openview.hp.com/
Víctor Cespón
Honored Contributor

Re: Adding Storage from MSA1500 to SuSE 10

From ACU, select the MSA1500 controller, on the right click Selective Storage Presentation.
This will take you to a table with the servers HBA WWN on the rows and the logical units you have created on the columns.

This way you can regulate which hosts have access to which logical units.