MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Alpha DS10 accessing MSA 2324fc

 
Jimmy Crossley
Occasional Visitor

Alpha DS10 accessing MSA 2324fc

I have an Alpha DS10 with a fibre channel card connected to an HP 8/20q switch.  This switch connects to an MSA2324fc Dual Controller Array.  I have created a volume and set an explicit mapping for this volume to be available to the Alpha.  The Alpha sees the volume, both at the console and after VMS 7.3-1 is running, but the disk shows up as offline.  Attempting to initialize or mount/foreign results in a DEVOFFLINE message.  Several other machines (VMware ESX servers) are accessing other volumes on this controller through the same switch, so I believe all the hardware is working.  Has anyone had a similar experience?