HPE Community
MSA Storage
1753797 Members
7279 Online
108805 Solutions
New Discussion юеВ

Re: B110i SATA RAID Controller sets up two drives as RAID 1+0

 
Mobile Mogul
Occasional Contributor

тАО04-28-2010 08:54 AM

тАО04-28-2010 08:54 AM

B110i SATA RAID Controller sets up two drives as RAID 1+0

I have two physical drives and want to set up one logical drive using RAID 1. The controller sets them up as RAID 1+0, and I can't see any option to change that. How can it set up two physical drives as RAID 10? There has already been a problem requiring the controller to rebuild one of the drives, and I suspect that is the reason. Am I wrong?
0 Kudos
Reply
2 REPLIES 2
Uwe Zessin
Honored Contributor

тАО04-28-2010 10:15 AM

тАО04-28-2010 10:15 AM

Re: B110i SATA RAID Controller sets up two drives as RAID 1+0

It's just a user-interface problem that has been there for a long time (maybe even from day one). By definition, you can't _have_ a RAID10 with only two disks!

Just ignore it, select "RAID 1+0" even if you have two disk drives and mentally read "RAID1" ;-)
.
0 Kudos
Reply
Mobile Mogul
Occasional Contributor

тАО04-28-2010 11:25 AM

тАО04-28-2010 11:25 AM

Re: B110i SATA RAID Controller sets up two drives as RAID 1+0

Thanks!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.