MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

B110i SATA RAID Controller sets up two drives as RAID 1+0

 
Mobile Mogul
Occasional Contributor

B110i SATA RAID Controller sets up two drives as RAID 1+0

I have two physical drives and want to set up one logical drive using RAID 1. The controller sets them up as RAID 1+0, and I can't see any option to change that. How can it set up two physical drives as RAID 10? There has already been a problem requiring the controller to rebuild one of the drives, and I suspect that is the reason. Am I wrong?
2 REPLIES 2
Uwe Zessin
Honored Contributor

Re: B110i SATA RAID Controller sets up two drives as RAID 1+0

It's just a user-interface problem that has been there for a long time (maybe even from day one). By definition, you can't _have_ a RAID10 with only two disks!

Just ignore it, select "RAID 1+0" even if you have two disk drives and mentally read "RAID1" ;-)
.
Mobile Mogul
Occasional Contributor

Re: B110i SATA RAID Controller sets up two drives as RAID 1+0

Thanks!