MSA Storage
1748164 Members
3513 Online
108758 Solutions
New Discussion юеВ

Cannot Access SAN MSA 2040 through Web Console

 
SahanaR
HPE Pro

Re: Cannot Access SAN MSA 2040 through Web Console

No it wouldnt affect production.the cable is connect so that you can access Web GUI.Removing it would only make you not access the web console.

Sahana@R
I'm an HPE employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo

Re: Cannot Access SAN MSA 2040 through Web Console

No impact on Production

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************************


I work for HPE
Accept or Kudo
Zuber1
Occasional Advisor

Re: Cannot Access SAN MSA 2040 through Web Console

Dear Subhajit,

I manage to get the cable, i have connected cable from Controller B to my laptop, am giving the password in putty console its not taking. the password i use to access my SAN though Web Console.

if i connect CLI cable to controller A, its not detecting in my pc.

Re: Cannot Access SAN MSA 2040 through Web Console

Then better to stop Host IO and go for full power cycle of the MSA.

After power down of the MSA better to remove power from MSA and wait for few minutes. Then physically re-seat Controller A before you go for power up again. 

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*****************************************************************************


I work for HPE
Accept or Kudo
Zuber1
Occasional Advisor

Re: Cannot Access SAN MSA 2040 through Web Console

How to physically re-seat Controller A ?

Re: Cannot Access SAN MSA 2040 through Web Console

Physically re-seat means just pull out controller from the Controller slot and then again put back in the same slot. Please find the Controller replacement instruction and this may help you to get idea of how to physically re-seat controller,

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03793459&docLocale=en_US

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

********************************************************************************


I work for HPE
Accept or Kudo