Change disk msa 2050

[Fsponton]

Hi everyone,

I have a broken disk in a raid6. i would like to know if for replacing it is necesary do some anyone configuration. Thanks.

[support_s]

System recommended content:

1. Product Change Notification: HPE MSA 1050, 2050, 2052 SAN Storage - End of Life Announcement

2. HPE MSA 2050 SAN Storage - Operations

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[sbhat09]

Hello @Fsponton,

If there was already a spare disk and the spare is already kicked into the RAID-6, then no worries for some time. If no spare, please replace the failed drive ASAP.

Technically, replacing a failed drive is not an immediate necessity. But important to protect data against further drive failures.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

[sbhat09]

Hello @Fsponton 

Hope you found it useful. Let me know if you need any further support.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.