Configuring Syslog on HP P2000

[ibuhuh]

Hello,

Do you know how I can configure syslog on a HP P2000 so that I can forward logs to a syslog server?

Kind Regards

[SUBHAJIT KHANBARMAN_1]

You can refer this link and look for "managed logs",

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05252785#N11263

Hope this helps!
Regards
Subhajit

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************************

[ibuhuh]

I'm just finding the tutorial for SNMPv3, but I would like to know how I can configure syslog

[SUBHAJIT KHANBARMAN_1]

I am not sure what you meant by Syslog but in order to receive SNMP alerts generated from MSA you need some Application or Software at the Server end. It can be Insight Remote Support. Please find the link to get configuration details,

http://h20464.www2.hp.com/Media/B5CE3FD4-B046-4355-A342-EE5F5918EAD1/en/Config-P2000-for-monitoring_steps.html

You can check the below link as well,

https://serverfault.com/questions/610750/hp-p2000-msa-g3-san-snmp-trap-setup

Hope this helps!
Regards
Subhajit

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************************

[Shawn_K]

Hello,

The P2000 is an older End of Life array that does not have the feature set which includes syslogs. Newer generations, such as the MSA2040 and MSA2050 do have the ability to use syslogs.

As mentioned previously, the P2000 does have the managed log feature.

Cheers,
Shawn

I work for Hewlett Packard Enterprise. The comments in this post are my own and do not represent an official reply from HPE. No warranty or guarantees of any kind are expressed in my reply.