Connecting LUN

New Member

Connecting LUN

There is HP P2000 G3 and C3000. In C3000 set 8 blades. 

When you create a LUN he joins all the blades do I need for this specific LUN saw blade. How to achieve this?

machine translation

Acclaimed Contributor

Re: Connecting LUN

From SMU (the web frontend) go to

Provisioning > Explicit Mappings

and map the volumes to specific blade servers (WWN).

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: Connecting LUN



this is the first time for me to be here on this post,  currently i have MSA p2000 SAN storage, connected with 5 blade servers. with respective permissions. 


now i have purchased a new additional enclosure only without controllers,  i have connected both the power cables on new enlcosure and the iscsi cables from SAN controller 1 & 2 to new additiona storage.


can any body help me out, how to create  LUN  with different size and Map it with specific server   & if i need a specific LUN to be shared by specific server 



Thank you