HPE Community
MSA Storage
1753837 Members
8884 Online
108806 Solutions
New Discussion

Create multiple iqn targets on MSA1040

 
wodel_youchi
Occasional Contributor

‎11-30-2017 09:20 AM

‎11-30-2017 09:20 AM

Create multiple iqn targets on MSA1040

Hi,

Is it possible to create multiple targets on an iSCSI MSA1040? and expose different volumes to different targets?

Regards.

0 Kudos
Reply
1 REPLY 1
HPSDMike
HPE Pro

‎11-30-2017 09:33 AM

‎11-30-2017 09:33 AM

Re: Create multiple iqn targets on MSA1040

What you are describing is standard explicit mapping of volumes to certain initiators. See pages 34 and 35 of the SMU reference guide https://support.hpe.com/hpsc/doc/public/display?docId=c04220794

 



I work for HPE. The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.

Accept or Kudo

Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.