Delete Host on P2000 G3 iSCSI

[aidechoute]

Hi all,

I have to delete some old host on an P2000 G3 iSCSI. (firmware TS230P008)

I have found this page but it doesn't work.

When i enter "show hosts" I have this:

# show hosts
Host ID                                   Name        Discovered Mapped
  Profile   Host Type
------------------------------------------------------------------------
iqn.1998-01.com.vmware:srv-esx-3bb6c62e   iSCSI-esx1  Oui        Non
  Standard  iSCSI
iqn.1998-01.com.vmware:srv-esx2-39c81869  OLD         Oui        Oui
  Standard  iSCSI
iqn.1998-01.com.vmware:srrvesx2-5b9cb91a  iSCSI-esx2  Oui        Non
  Standard  iSCSI
iqn.1998-01.com.vmware:srv-esx-3bb8c62e               Oui        Non
  Standard  iSCSI
------------------------------------------------------------------------

I want to delete the one which called OLD what I have to enter??

Thanks

[Torsten.]

AFAIK you cannot. As long as the HBA is visible, the array will discover it again and again.

[aidechoute]

Torsten,

Thanks for your feedback.

But this host is link with an old esx server (I have reinstall it so the iqn is now different).

How can I do to make the array not discover again and again?

Thanks

[Torsten.]

As long as the array can see the servers HBA, this HBA (host) will be discovered and listed. IMHO there is no way to delete a host entry - unfortunately.

[aidechoute]

Even if I stop my esx server?

[Johan Guldmyr]

But if you delete it and then the rediscovery, shouldn't it find the new IQN of the box?

Aidechoute: did you look in the P2000 CLI Reference Guide?