SOLVED
Hello,
Using the correct cable, driver, and terminal emulator, this works fine; I've done it a lot of times. Complete instructions for using the CLI cable can be found at https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03820027
Windows driver, for the cable, can be found https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f7441b0018c143ac88d83572e8
I work for HPE. The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
The cable is just an USB cable (USB A to USB B mini), but inside the controller is a serial to USB converter. You need the driver to make the driver working, this will add another COM port to your PC.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
