Driver lpfc is incompatable with libdfc. The driver must be at least at DFC Rev 81.0

[Jonathan Cowherd]

I've got a HP FC2243 dually connected to a MSA 1000 and running with Emulex drivers from HP. I can see the controllers and the SAN when I run "hp_rescan -a", but I can't get the WWID from HBAnyware to setup multipath correctly (currently my array is showing up as sg0 instead of sda0). HBAnyware shows the following at the commandline:

Driver lpfc is incompatable with libdfc. The driver must be at least at DFC Rev 81.0

The HBAnyware proceeds to launch, but does not show any of the topography.

I installed the latest HP_ElxApps-26-3.2a16-8.1.10.11.bin on RedHat EL 5.1, and I'm getting the following message when I run HBAnyware:

Driver lpfc is incompatable with libdfc. The driver must be at least at DFC Rev 81.0

Here are my RPMS:

libdfc-2.15.1007-1
hpsmdb-libs-8.2.1-1HPSIM
hpsmdb-server-8.2.1-1HPSIM
hp-lpfc-8.1.6.8-5
hpsim-pgsql-config-C.05.02.01.00-1
hpsim-C.05.02.01.00-1
hpsmdb-8.2.1-1HPSIM

Any ideas what may be going on?