MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Driver lpfc is incompatable with libdfc. The driver must be at least at DFC Rev 81.0

 
Jonathan Cowherd
Occasional Visitor

Driver lpfc is incompatable with libdfc. The driver must be at least at DFC Rev 81.0

I've got a HP FC2243 dually connected to a MSA 1000 and running with Emulex drivers from HP. I can see the controllers and the SAN when I run "hp_rescan -a", but I can't get the WWID from HBAnyware to setup multipath correctly (currently my array is showing up as sg0 instead of sda0). HBAnyware shows the following at the commandline:

Driver lpfc is incompatable with libdfc. The driver must be at least at DFC Rev 81.0

The HBAnyware proceeds to launch, but does not show any of the topography.

I installed the latest HP_ElxApps-26-3.2a16-8.1.10.11.bin on RedHat EL 5.1, and I'm getting the following message when I run HBAnyware:

Driver lpfc is incompatable with libdfc. The driver must be at least at DFC Rev 81.0

Here are my RPMS:

libdfc-2.15.1007-1
hpsmdb-libs-8.2.1-1HPSIM
hpsmdb-server-8.2.1-1HPSIM
hp-lpfc-8.1.6.8-5
hpsim-pgsql-config-C.05.02.01.00-1
hpsim-C.05.02.01.00-1
hpsmdb-8.2.1-1HPSIM

Any ideas what may be going on?