cancel
Showing results for 
Search instead for 
Did you mean: 

EMU MSA30

 
bvlente
Occasional Contributor

EMU MSA30

Hello,

I want to use the emu on a MSA30, but the problem is that i don't know how to get it work.
Can some one tell me how too get it work?

Thanks
4 REPLIES 4
Steven Clementi
Honored Contributor

Re: EMU MSA30

How exactly are you tring to "use" it?

The EMU is an environmental monitoring unit and generall does not need to be accessed except for advanced diagonistics and/or updates by a trained professional.

As far as I know, there is no end user interface.


The EMU operates ono its own, reportong in the health of various components in the MSA30. This is automatic/default behavior.

Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
bvlente
Occasional Contributor

Re: EMU MSA30

Steven,

Thank you for you're answer.
The reason for the question is that i must find a way too get the serialnumbers of every msa30 we have.

Is there any other way too get the sn? Or is the only way too look at the right side of the msa30?

Bart
Nidal Ali
Advisor

Re: EMU MSA30

This is true, the EMU is just for monitoring the MSA30 enclosure condition, if you need to know the serial number of MSA30 enclosure without looking to the right side of the enclosure try to use the ACU management tool.

Nidal
Nidal Qashou
Steven Clementi
Honored Contributor

Re: EMU MSA30

You should be able to get the serial number by using the survey utility or the Insight Manager Agents (Systems Management Homepage), or even SIM. (Assuming that the MSA's are attached to HP servers).


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)