MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA HSV300 and iSCSI

 
SOLVED
Go to solution
Highlighted
Deland01
Occasional Contributor

EVA HSV300 and iSCSI

We have an EVA HSV300 and I would like to create a volume & present this to a Server 2008 R2 box server using the standard Windows iSCSI Initiator.

 

Does anyone know if this is possible?

2 REPLIES 2
Torsten.
Acclaimed Contributor
Solution

Re: EVA HSV300 and iSCSI

Since the EVA has no ethernet port for data transfer you need "something between", e.g. a multi protocol router or something like VSA software.

http://www.hp.com/go/vsa

and appropriate server hardware.

 

This would mean an extra server to provide access to your existing server.

 

Consider to just plug in an FC card into your server ...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: EVA HSV300 and iSCSI

Since you need new hardware anyway, have a look at MSA2040 or MSA1040 or even a small 3PAR 7200. If you are sure you need it for a single server only, consider a disk chassis like D2700 or D3700, depending on your server.

 

http://www.hp.com/go/msa2040

 

http://www.hp.com/go/msa1040

 

http://www.hp.com/go/storeserv

 

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!