cancel
Showing results for 
Search instead for 
Did you mean: 

EVA4000

 
D Williams
Occasional Contributor

EVA4000

Hi

I have a brand new EVA4000 installation. Mirror Port 2 shows a failed state in EVA CV.

Have already swapped MP cables around. Any suggestions? We are planning to swap out the HSV200 controller. Cannot determine which one HSV200 it is currently.

EVA CV verion = 4.1.2
XCS f/w = 5.031

Cheers for now.

Regards

Derek
1 REPLY 1
Uwe Zessin
Honored Contributor

Re: EVA4000

Is the cell already initialized?
If I remember correctly, it always shows an error state while the cell is not initialized.
.